QUICK TIPS FOR THE PXC 2-IN-1 NAIL & STAPLE GUN
The PXC 18V 2-in-1 Nail & Staple Gun is a must have for a whole range of tasks around you home – from quick fix-it’s to craft and upholstery.
A little technique goes a long way, so check out Andrew’s top tips for using the PXC 2-in-1 Nail & Staple Gun from the PXC range, ensuring your staples and nails go in flush every time.
FINAL SELECT THE RIGHT SIZED NAILS & STAPLES
This unit takes C1 Brad Nails 15-32mm and Narrow Crown Staples 15-25mm
CLAMP YOUR MATERIAL
Its always a good idea to clamp your materials to free up your hands while firing the gun.
USE TWO HANDS
Use both hands, one for the trigger and the other for applying firm pressure on the Nail & Staple Gun where you adjust the tension. This helps prevent any kickback when the nail strikes into the material.
FINAL TIPS
Vertical firing will require more pressure. Adjust firing depth with the tension dial and ensure you are firing the nails in straight and not on an angle.
Finally, ditch the hammer and save some elbow grease by using Nail & Stapler!
Check out the PXC 18V 2-in-1 Nail & Staple Gun here, available at your local Bunnings.